IE ECU Stages for your MK6 R or 8J TTS 2.0T K04 engine is available for Stage 1 stock engines or with modified hardware for Stage 2 and above. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need anIE POWERlink Direct-port Flash Tool(sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your TSI in a matter of minutes!
WHAT DOES THE 2.0T FSI K04 ECU TUNE DO?
IE's motorsport-inspired software completely retunes the ECU calibration on your 2.0T FSI (EA113) factory K04 turbo engine while retaining factory comfort and reliability. using industry-leading tuning technology and decades of race engine tuning experience, IE engineers completely reverse engineer the factory mapping and customize it to maximize performance for the enthusiast driver for the street and track. Your new software tune is easily uploaded to your factory installed ECU (engine control module) without touching a wrench in your own driveway. Multiple tunes are available to match your stock or installed aftermarket hardware.
AVAILABLE GOLF R / TTS TUNE STAGES
The IE Stage 1 Golf R / TTS tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware. In a matter of minutes, the vehicle will be much more enjoyable to drive with a massive boost in performance. Includes octane switching between 91 and 93 octanes.
Stage 1 recommended hardware -IE Cold Air Intake -IE Intercooler
For customers looking to maximize the performance of the stock engine and turbo setups with bolt-on hardware, IE Stage 2 software fine-tunes the ECU calibration to match installed aftermarket hardware. Stage 2 results deliver massive power gains across the powerband, fully realizing the engine and stock turbocharger potential. Includes 91, 93, and 100 octane switching.
IE Stage 2 Pro performance software incorporates the massive power gains seen in the IE Stage 2 performance tune, but further builds on the performance aspects by including the motorsport functions of launch control and no-lift shift. These features are built into the software tune and offer neck-breaking launches and lightning fast shifting with no loss of boost between gears. This provides a large advantage over similarly powered vehicles. Includes 91, 93, and 100 octane switching. Only available for MK6 Golf R, not available for TT-S.
Stage 2 Pro required & recommended hardware -Performance Downpipe(required) -IEHigh PressureFuel Pump Upgrade (required) -Performance clutch upgrade(required for Manual) -IE DSG Transmission tune(required for DSG) -IE Cold Air Intake(recommended) -IE Intercooler(highly recommended)
IE STAGE 2 LIGHT IE Stage 2 light software is for customers who have installed a downpipe required for Stage 2 but have yet to install an IE High Pressure Fuel Pump (HPFP). Installing a performance downpipe while running a stock or Stage 1 ECU tune can result in over-boost conditions, check engine lights, or "Limp Mode". Stage 2 light will increase power levels taking advantage of the downpipe change while keeping safe fuel operating conditions. This will increase power greatly over Stage 1, but not to our full IE Stage 2 High Torque file. Stage 2 light is included with the purchase of a Stage 2 file, once an upgraded HPFP is added, the user may upgrade to IE Stage 2 at any time at no additional cost.
Stage 2 required & recommended hardware
IE DSG Transmission tune(required for DSG)
IE Cold Air Intake(recommended)
IE Intercooler(highly recommended)
Performance clutch upgrade (highly recommended)
IE STAGE 2 INTAKE MANIFOLD PRO
IE Stage 2 Intake Manifold Tune for your MK6 Golf R or Audi TTS is designed for customers looking to maximize the performance of the factory engine and turbocharger with an IE 2.0T Performance Intake Manifold (Sold Separately). IE Stage 2 Intake Manifold software fine-tunes the ECU calibration to match the manifold plenum and runner flow characteristics along with special tuning for the removed runner flaps. This file also includes launch control and no-lift shift, offering the same neck-breaking launches and lightning fast shifting with no loss of boost between gears as our Stage 2 Pro Tune. Results with a manifold deliver massive power gains across the powerband, fully realizing the Golf R's stock turbo and engine's potential. Includes 91, 93, and 100 octane switching. Stage 2 IM Pro is an included upgrade with your purchase of a Stage 2 Pro Tune at no extra cost.
Stage 2 Intake Manifold Pro required & recommended hardware
IE's own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.
VW - Golf R 2012-2013 (MK6) 2.0T engine
AUD I - TTS 2008-2015 (8J) 2.0T engine (Stage 2 Pro not available)