ADD POWER, TORQUE, SOUND
Force feed your 2013.5+ Jetta or GLI with the EA888 Gen 3 1.8T or 2.0T TSI engine a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that receives high-velocity air fed directly from a 5" bellmouth. Our high-flow velocity stack is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.
- INCREASED HORSEPOWER & TORQUE
- ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
- HIGH-FLOW VELOCITY STACK
- MASSIVE OVER-SIZED AIR FILTER
- BLACK POWDER COAT FINISH
- EASY INSTALL WITH NO MODIFICATIONS
- USES FACTORY MOUNTING GROMMETS & HARDWARE
- HEAT SHIELDING & DIRECTED AIR FLOW
- REINFORCED SILICONE HOSES
- FITS DSG AND MANUAL TRANSMISSIONS
This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.
HIGH-FLOW VELOCITY STACK
The air intake utilizes a high-flow velocity stack behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the turbocharger and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry of the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!
THERMAL BLOCKING HEAT SHIELD
The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.
DO YOU NEED AN SAI KIT?
Your Jetta/GLI Gen 3 2.0T or 1.8T engines may have come factory equipped with a secondary air injection (SAI) pump. Engines with SAI require an IE SAI Filter Adapter Kit for this SAI line when installing an aftermarket intake. Engines not equipped with this SAI pump do not require this filter kit. Identify if your engine requires an SAI filter kit using the photos below and add an SAI filter kit above if needed when ordering your intake.
Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.
CLICK HERE to view and download the Cold Air Intake install guide
CLICK HERE to view and download the SAI Kit install guide
- VW - 2013.5+ MK6 GLI 2.0T TSI (EA888 Gen3) engines
- VW - 2013.5+ MK6 Jetta 2.0T TSI (EA888 Gen 3) engines
- VW - 2013.5+ MK6 Jetta 1.8T TSI (EA888 Gen 3) engines
*Note: This intake only fits 2013.5+ Jetta and GLI 1.8T and 2.0T EA888 Gen 3 engines. Does not fit 2.0T EA888 Gen 1/2 or 1.4T TSI engines. If your car is equipped with an EA888 Gen1/2 engine, please purchase IE MK5 & MK6 Cold Air Intake Kit For 2.0T TSI