Shipping delays still exist in some cases - please email if your order is urgent!

Search

Add your deal, information or promotional text

KW Variant 1 Coilover Suspension, MKV Volkswagen Jetta/Gli & R32

KW-10210040

The KW Variant 1 "inox-line" coilover kit is the entry model for increased driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous Lowering

With the KW Variant 1 coilover you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on the vehicle model variance ranges between 30 to 70mm or 50 to 90mm. Even after years of use you can easily adjust the height due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The Benchmark For Tuning Fans

KW Variant 1 "inox-line" coilover satisfies the sporty driver with its harmonic basic setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you are not just buying any coilover, but a KW coilover which has been developed specifically for your particular vehicle. As a manufacturer , KW uses only its own resources, high quality components , and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression giving you the benefit of genuine directness and sportier handling while driving.

Trust In KW's Experience

KW is the market leader and innovator of individual suspension solutions for road and racetracks for more than 15 years. Car drivers, automotive manufacturers , and tuners all around the world rely on KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. As a German manufacturer KW offers a 2-year warranty on more than 4600 applications suspension solutions, which exceed OEM quality. The warranty increases up to 5 years when the kit has been installed at one of KW's specialist dealers.

Features:

  • Optimally pre-adjusted
  • Sporty and comfortable dampening technology
  • Stainless steel technology "inox-line"
  • Individually height adjustable
  • TÜV-tested adjustment range
  • Ready to install complete solution
  • High quality components for a long durability
  • Complete documentation for easy handling

Factory Pre-Configured Damping Setup

The KW Variant 1 "inox-line" coilover has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, allowing you to experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".

Application Guide with Lowering Ranges:

  • 2008 Volkswagen R32 (MkV)
    • Front:0.8" to 1.8" Lowering Range
    • Rear: 0.4" to 1.4" Lowering Range
  • 2012 - 2013 Volkswagen Golf R without DCC (MkVI)
    • Front: 0.2" to 1.4" Lowering Range
    • Rear: 0.2" to 1.4" Lowering Range
  • 2005 - 2010 Volkswagen Jetta/GLI (MkV)
    • Front: 1.4" to 2.5" Lowering Range
    • Rear: 1.4" to 2.5" Lowering Range

Note: This coilover kit will fit MkVI Golf R without DCC. 

A Little Tuning Co - Instagram

Search