S6 C6 5.2FSI
Center Driveshaft CV Joint for Audi Quattro Vehicles
$182.85
Having issues with excessive vibrations from your Audi's center driveshaft? Is your car going through center driveshaft support bearings on a regular basis? If so,...
View full product details
Driveshaft CV Boot Repair Kit for Audi Quattro Vehicles
$60.95
Are your driveshaft CV boots ripped after years of abuse underneath your car? Are you looking to replace your driveshaft CV Joint and protect it with...
View full product details
G17 Fuel Additive, Genuine Audi/Volkswagen
$26.45
Genuine Audi/Volkswagen G17 Fuel Additive.
View full product details
IE -6ORB to 5/16" Hose Barb Fitting (BLACK)
$26.45
These unique fittings feature a -6 AN o ring boss port on one end, and a 5/16" hose barb on the other end. By use...
View full product details
IE -8 AN O Ring Boss to 5/16" Hose Barb Fitting
$26.45
These unique fittings feature a -8 AN o ring boss port on one end, and a 5/16" hose barb on the other end. By use...
View full product details
IE -8ORB to 5/16" Hose Barb Fitting (BLACK)
$26.45
These unique fittings feature a -8 AN o ring boss port on one end, and a 5/16" hose barb on the other end. By use...
View full product details
IE 1" Inlet Breather Filter
$35.65
Integrated Engineering 1" Inlet Breather Air Filter
View full product details
IE 2.0T TSI Oil Drain Flange Kit
$41.40
When running a big turbo setup on a 2.0T TSI this flange makes plumbing a -10AN oil line simple. Manufactured in house out of 6061...
View full product details
IE 2.5" Cobra Head Coupler
$62.10
Integrated Engineering offers a full line of silicone couplers for your project- whether it be a simple intake install, factory hose replacement, or a full...
View full product details
IE 3" Inlet Cone Air Filter
$79.35
Integrated Engineering 3" Inlet Low Profile Cone Air Filter
View full product details
IE 3.0" to 2.5" Cobra Head Coupler
$66.70
Integrated Engineering offers a full line of silicone couplers for your project- whether it be a simple intake install, factory hose replacement, or a full...
View full product details
IE 3.5" to 2.5" Cobra Head Coupler
$70.15
Integrated Engineering offers a full line of silicone couplers for your project- whether it be a simple intake install, factory hose replacement, or a full...
View full product details
IE 3/4" Barb to -10AN Male Adapter Fitting, Black Anodize
$49.45
This custom fitting features a 3/4" hose barb on one end and a -10AN male on the other. We used these in our catch can...
View full product details
IE 4" Inlet Low Profile Air Filter
$79.35
Integrated Engineering 4" Inlet Low Profile Cone Air Filter
View full product details
IE 4.0" Inlet Cone Air Filter
$79.35
This is an Integrated Engineering universal 4” tapered cone air filter. These filters can be used on any custom intake setup, directly on a turbo,...
View full product details
IE AEM Fuel Pump Adapters for IE Dual Surge Tank & IE Outlet Manifold
$70.15
These fittings allow you to easily install AEM 380LPH fuel pumps into your existing Bosch 044 fuel pump powered IE Dual Surge Tank & IE...
View full product details
IE Billet Dual Tank for Submerged Bosch 044/AEM 380LPH Pump
$523.25
Integrated Engineering's innovative dual surge tank design is essential on modified cars requiring higher fuel output, where effective scavenging is a must. This surge tank...
View full product details
IE Billet Dual Tank for Submerged Bosch 044/AEM 380LPH Pump w/ Corrosive Fuel Upgrade
$662.40
Integrated Engineering's innovative surge tank design is essential for drag race, track, and drift cars. During hard cornering or acceleration, the stock pump will frequently...
View full product details
IE Billet Surge Tank for Submerged Bosch 044/AEM 380LPH Pump
$418.60
IE Bosch 044 surge tank. Bosch 044 pump sold separately.
View full product details
IE Billet Surge Tank for Submerged Bosch 044/AEM 380LPH Pump w/ Corrosive Fuel Upgrade
$540.50
Integrated Engineering's innovative surge tank design is essential for drag race, track, and drift cars. During hard cornering or acceleration, the stock pump will frequently...
View full product details
IE Billet Surge Tank Front Plate for Bosch 044 or Similar (DUAL PUMP)
$262.20
These are the billet aluminum Bosch 044 mounting plates that we use for our dual 044 surge tanks. We are now selling them separately for...
View full product details
IE Billet Surge Tank Front Plate for Bosch 044 or Similar (SINGLE PUMP)
$174.80
These are the billet aluminum Bosch 044 mounting plates that we use for our 044 surge tanks. We are now selling them separately for anyone...
View full product details
IE Bosch 044 Inlet Fitting to OE VW/Audi Connector (18x1.5mm) (BLACK)
$26.45
This fitting is used when installing a Bosch 044 fuel pump in place of the factory fuel filter on the MK4 Golf/Jetta chassis. It will...
View full product details
IE Bosch 044 Inlet to 5/16" Hose Barb
$28.75
This fitting is used when installing a Bosch 044 in line with factory 5/16" rubber hose. This Inlet adapter fitting has a 5/16" hose barb...
View full product details
IE Bosch 044 Outlet Fitting to OE VW/Audi Connector (12x1.5mm) (BLACK)
$26.45
This fitting is used when installing a Bosch 044 fuel pump in place of the factory fuel filter on the MK4 Golf/Jetta chassis. It will...
View full product details
IE Dual Surge Tank Outlet Manifold (AEM Pumps Only, 8AN Outlet Fittings)
$226.55
Already running an IE Dual Surge Tank with and IE Outlet Manifold and wanting to upgrade your Bosch 044 fuel pumps to the new AEM 380LPH...
View full product details
IE Factory VW/Audi Quick Release Fuel Line to -6AN Male Adapter (BLACK)
$35.65
Make installation of -6AN lines to your factory hard lines a simple task. This innovative two-piece fitting clips together on the SAE quick connect 5/16""...
View full product details
IE Fuel Pump Manifold Kit for Dual Surge Tank -6AN Outlet Bosch Pumps
$157.55
We have designed these fuel distribution manifolds to go along with our dual surge tanks. They make plumbing two Bosch 044 fuel pumps a breeze,...
View full product details
IE Fuel Pump Manifold Kit for Dual Surge Tank -8AN Outlet Bosch Pumps
$157.55
We have designed these fuel distribution manifolds to go along with our dual surge tanks. They make plumbing two Bosch 044 fuel pumps a breeze,...
View full product details
IE M12 x 1.50 to 8mm Hose Barb (Bosch Pump Outlet)
$28.75
This fitting is used when installing a Bosch 044 in line with factory 5/16" rubber hose. This M12 adapter outlet fitting has a 5/16" hose...
View full product details
IE Male OE VW Push to Connect to Male -6AN Adapter
$26.45
This fitting can be installed anywhere that a male quick connect fitting previously was. Such as using an aftermarket fuel filter and running -6an lines....
View full product details
IE Oil Restrictor GT Turbo to -4AN .063 Orifice (BLACK)
$26.45
This Integrated Engineering turbo oil restrictor fitting is perfect for use on your new ball bearing turbo. With a .063" orifice, this is the standard...
View full product details
IE Oil Restrictor GT Turbo to -4AN .063 Orifice (RED)
$26.45
This Integrated Engineering turbo oil restrictor fitting is perfect for use on your new ball bearing turbo. With a .063" orifice, this is the standard...
View full product details
IE T3/T4 Oil Return Flange
$52.90
This is an oil drain flange for T3/T4 turbos. These are made in house on our CNC mill from 6061 aluminum. This billet piece features...
View full product details
IE Turbo Oil Restrictor Fitting 1/8" NPT to -4AN .063" Orifice (BLACK)
$26.45
This Integrated Engineering turbo oil restrictor fitting is perfect for use on your new ball bearing turbo. With a .063" orifice, this is the standard...
View full product details
IE Turbo Oil Restrictor Fitting 1/8" NPT to -4AN .063" Orifice (RED)
$26.45
This Integrated Engineering turbo oil restrictor fitting is perfect for use on your new ball bearing turbo. With a .063" orifice, this is the standard...
View full product details
Ignition Coil, 2.0TFSI Red
$48.30
Fix those pesky misfires on your Audi or Volkswagen by replacing your ignition coil packs with these red OEM push-in coils found on the Audi...
View full product details
Wheel Nut, Audi/VW R13 Ball Seat, M14x1.5
$16.10
High quality M14x1.5mm wheel nut with 3/4" wrench head, features the R13 profile (13mm radius on ball) Audi / VW ball seat radius.
View full product details
Wheel Nut, Cone Seat, M14x1.5
$12.65
High quality M14x1.5mm cone seat wheel nut with 3/4" wrench head. Cone seat profile is compatible with most aftermarket wheels.
View full product details
Wheel Stud and Nut Kit, M14x1.5, Cone Seat
$26.45
Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features cone-seat wheel nuts meant for use with aftermarket wheels.
View full product details
Wheel Stud and Nut Kit, M14x1.5, R13 Ball Seat, Audi/Volkswagen
$29.90
Wheel nut and stud combo, M14x1.5 threads, Metric Grade 8.8 with Zinc plating. Features R13 ball-seat wheel nuts meant for use with factory Audi/Volkswagen wheels....
View full product details
Wheel Stud, M14x1.5, Volkswagen/Audi/Porsche Applications
$16.10
M14x1.5 threaded wheel studs. Metric Grade 8.8 with Zinc plating.
View full product details